DISCOUNTS FOR FIRST RESPONDERS, NURSES, AND TEACHERS

A thermal camera shows surface temperature differences that can't be seen with the eye alone. Used alongside a home inspection, it can point us to areas that deserve a closer look, such as a possible leak or an overheating electrical component.
Get a quote for your thermal camera inspection
A home inspection is a limited visual survey, and some conditions don't leave visible signs on the day we're there. The TREC Standards of Practice don't require thermal imaging equipment, so this service goes beyond the minimum requirements of a standard inspection.
The camera doesn't replace the inspection. It gives us another source of information, and it can show where to look more closely.
Included in the Essential package. We focus on two systems:
Included in the Preferred and Premier packages. It includes everything in the Targeted Thermal Scan, plus:
The camera reads surface temperature. A temperature pattern may indicate one of these conditions, but it doesn't confirm the condition on its own:
When we see an anomaly, we follow up with the tools available during the inspection, such as a moisture meter. If it needs further evaluation, we'll recommend the appropriate licensed professional.
A thermal camera doesn't see through walls and doesn't detect moisture, mold, or wiring directly. It shows surface temperature at the time of the scan, so it can't guarantee that a home is free of leaks, moisture, or electrical problems, and it can't predict future conditions.
Results depend on conditions during the inspection. A small difference between indoor and outdoor temperatures can limit what wall and ceiling scans show, and an active leak may not appear if the area is dry that day. Furniture, stored items, wall coverings, and reflective surfaces can also limit the scan.
This service isn't a mold test, energy audit, code compliance inspection, or electrical load test, and we don't provide repair cost estimates.
Isn't thermal imaging part of a standard home inspection? Not necessarily. The TREC Standards of Practice don't require inspectors to use thermal imaging equipment. Some inspectors offer it as an additional service, as we do.
Can a thermal camera see inside walls? No. It reads temperature at the surface. A condition behind a wall may show up only if it changes the surface temperature enough for the camera to detect.
Does a thermal camera find mold? No. It may show a temperature pattern associated with moisture, but it can't identify mold. If you're concerned about mold, ask about evaluation by an appropriately licensed mold professional.
Does the weather affect the results? It can. Wall and ceiling scans generally show more when there's a larger temperature difference between the inside and outside of the home. We'll note conditions that limit the scan.
Do you need to cut into walls or move anything? No. The camera doesn't touch or damage the surfaces it scans. We don't cut into finishes or move furnishings or stored items.
Can I book thermal imaging without a home inspection? We offer thermal imaging with a home inspection, not as a standalone service. Call us if you'd like to discuss a specific concern."
Read our guide: Here
Heart and Home Inspections serves Denton, Dallas, Collin, Tarrant, Rockwall, Wise, and Cooke Counties.
Call 469-558-4949 or request a quote online. GET A QUOTE
Heart and Home Inspections, LLC | TREC License #25313
Add to any standalone home inspection or choose from one of our bundled packages
Heart and Home Inspections
500 Waters Edge Drive, Lake Dallas, Texas 75065, United States
Heart and Home Inspections provides TREC-licensed home, commercial, and specialty inspections throughout
Denton, Dallas, Collin, Wise, Cooke, Rockwall, and Tarrant Counties from our home base in Lake Dallas, TX.
Copyright © 2026 Heart and Home Inspections - All Rights Reserved.